Really happy with the blouse. The fitting was comfortable and the finish was neat. The whole process was very smooth.
Frequently Asked Questions (FAQs)
Blouse Kandha Girna is mostly because the blouse is made with straps that are too wide apart and/or because of incorrect shoulder line. This is corrected by our Tailors at the time of Fitting the blouse.
All of them have different pattern cuts to accentuate the bust and have different appeal. The choice depends on individual figures and occasions. Our designers will be happy to help you with this.
To find out the perfect depth of the armhole, divide bust circumference by 6. For example if your bust is 36” then the ideal armhole depth will be 36/6 = 6 inches.
The allowance varies based on the design. Generally speaking the allowance for stitching is more in case of side seams (about 1.5 inches) compared to the allowance at shoulders and armhole.
Yes, We will be delighted to visit your place and our Tailor will be happy to take the measurements.
The distance apart the tucks vary from person to person based on the bust points. Our expert Tailors will take this measurement and ensure that the blouse fits perfectly.
The cups have to fall exactly on the bust point. Our expert Tailors take the bust point measurement and ensure that the cups fall in the correct position.
Blouses with embroidery require precision and are best left to professionals! Our Tailors ensure that the embroidery falls perfectly matching motifs on both sides of a seam.
Apart from the evenly done piping at the neckline, another key element is cutting the piping cloth at an angle of 45 degrees or what is technically known as cutting along the bias. Our expert Tailors know their craft and ensure that your blouse has perfect thread Piping.
If the blouse is too tight at the bust/armhole then the side seams can be opened up a little to make the blouse roomy at the bust. In case it is very tight at the armhole then it can be corrected by bringing down the armhole a bit. This can be done by our Tailor at the time of blouse fitting.
This is because of incorrect tapering done at the waist to accommodate the curve. Sometimes it is also because the Zipper has been stitched too tightly. Our expert tailors ensure that the Zipper lies flat at the time of blouse fitting.








